This item is made to order and typically ships within approximately 2–3 weeks.
If you need a more precise ETA before placing your order, feel free to contact our team at sales@carbonaddons.com and we'll be happy to assist.
Take the rear aerodynamics of your 2005–2009 Ford Mustang S197 to the next level with the APR Performance GTC-500 Carbon Fiber Adjustable Rear Wing. Designed for high-performance street cars, track builds, and time attack applications, the GTC-500 is APR's large-format aerodynamic wing engineered to generate substantial rear downforce while maintaining aerodynamic efficiency.
The GTC-500 features a Computational Fluid Dynamics (CFD) developed airfoil profile designed to maintain airflow attachment and generate an effective pressure differential across the wing. With an impressive 8.88:1 downforce-to-drag ratio, the wing provides significant rear downforce without an excessive drag penalty.
A fully adjustable 0°–15° angle of attack allows drivers to fine-tune the aerodynamic setup based on track conditions and vehicle balance. Higher angles provide increased downforce for improved rear traction, cornering, and braking stability, while lower settings reduce drag for better straight-line performance.
Constructed from autoclave-cured pre-preg woven carbon fiber and supported by aircraft-grade 6061 billet aluminum risers, the GTC-500 delivers the strength, rigidity, and lightweight performance required for serious aerodynamic loads.
Important Fitment Note
Fits 2005–2009 Ford Mustang S197 applications.
The vehicle-specific mounting bases are positioned near the outer edges of the trunk lid.
Please verify your trunk and existing spoiler configuration before installation.
Key Features
CFD-Developed Airfoil The GTC-500 airfoil profile was developed using Computational Fluid Dynamics to generate high levels of downforce while minimizing unnecessary aerodynamic drag.
Adjustable 0°–15° Angle of Attack Allows the aerodynamic balance to be tuned for different tracks and driving conditions. Increase the angle for additional downforce or decrease it to reduce drag.
8.88:1 Downforce-to-Drag Ratio Optimized to provide substantial rear downforce while maintaining strong aerodynamic efficiency.
Autoclave-Cured Pre-Preg Carbon Fiber Constructed from pre-impregnated woven carbon fiber and autoclave cured in aluminum billet molds for exceptional rigidity, durability, and strength-to-weight ratio.
Aircraft-Grade Aluminum Risers Uses high-strength 10mm 6061 billet aluminum risers designed to securely support the wing under aerodynamic loads.
Vehicle-Specific Mounting Carbon fiber bottom plates provide a vehicle-specific mounting solution for the S197 Mustang.
Track-Focused Aerodynamics Ideal for track cars, time attack builds, and high-performance street Mustangs requiring significantly more rear downforce than smaller aerodynamic wing designs.
Note: Mounting bases sit near the edges of the trunk lid.
Optional Carbon Fiber Gurney Flap
An optional Carbon Fiber Gurney Flap is available for additional aerodynamic performance. Installed along the trailing edge of the airfoil, the Gurney Flap helps increase downforce and reduce airflow separation for additional rear grip at speed.
Height: 1/2" (12.7 mm)
Construction: Pre-preg woven carbon fiber
Attachment: 3M VHB double-sided tape
Roll over image to zoom inClick on image to zoom
/
Customer Reviews
Overall rating: 4.8 / 5 from 5103 reviews.
Looks great, fitment is not. The lower portion doesn’t sit flush on the shift knob. If you push it for the double sided tape to stick (which it doesn’t) it makes the top portion unflush. Lots to be desire for the price.
My C7 has the factory carbon fiber dash that has a matte finish and I thought the lower steering wheel cover would give my interior a nice accent to the OEM dash. I will admit, I was a little leary about how well this trim would look and fit but I am very impressed with how it looks. The fiber and matte finish matches the OEM dash perfectly. I was also very happy with how well it fit over the original cover on the steering wheel. Easy to install, perfect fit and I'm very happy with it.
I have this part as shown in the photo, but it is the only carbon fiber item that is on my 2017 Camaro SS convertible that is black. All of my other carbon fiber items are in glossy red. Can you please make this exterior door handle in glossy red carbon fiber? Thank you. Rick Gehrt 309-472-6087
Looks amazing and very precise and accurate fit. No modifications we necessarily. These images show the Carbon Fiber M Style Mirror Covers that I also purchased and put on together and the combination is perfect.
*note - when installing make sure you follow the instructions regarding heating the tape until it gets gummy. The snug fit causes the adhesive to catch as it is being put on, especially around the thin perimeter of the mirror . The tape needs to be able to move because of this. Apply moderate to heavy pressure until it is fully seated and then hold in that position while adding a slight squeezing force around the areas where the tape was on the cover.
I have many Carbon Addons products, both cover and overlay applications. The shift paddles are closer to full replacement part than anything and they are nothing short of awesome. Like all Carbon Addons products, the quality and fitment is outstanding!
CARBONADDONS for the win again... I have so many additions from yall and they never miss the mark... yall are my only place to go get my carbon additions for my challenger!
some of stuff was good, some did not fit right. I would double check everything before ordering.
these people keep pushing you, so not thrilled with that...too many emails/texts.
then asked question about 1 of the parts fitting, and guy did not know.
thanks
I have added a ton of pieces on the interior, from the console, waterfall, speakers, door, overhead, garage buttons and the steering wheel which I highly recommend. My car is six years old and the oyster gray isn't holding up or able to clean up, so these pieces really dressed up my interior to the next level or two! Thank uou Carbonaddons!!!!
Fast service. High quality. Easy installation. Followed reviews and recommendations to test fit and heat the adhesive first. Next plan is for a splitter and door side skirts!
Very dissatisfied does not fit like it states in the picture I am gonna post it all over social media that you guys refuse to give me my total refund. Your post is very wrong. It does not fit 2019+
The first photo is the before, the second is the passenger side that looks great. Where I am disappointed in is the drivers side, if you look at the top it does not cover the original completely at the top and some of the silver shows thru. A fraction more carbon material and it would be great. That is disappointing and why I only rated it as 3 stars.
We offer free shipping on CarbonAddons® products for continental U.S. orders over $199.
Satisfied or refunded
We know you’ll love our products! But in case you are not fully satisfied for any reason, simply return the item(s) for an exchange, store credit, or refund within 30 days of purchase using our hassle free return portal.
Top-notch support
Our support team are available via email or chat from Mon-Fri 9am-5pm PST except holidays.
1 Year Warranty
We offer a limited 1 year warranty on defects on all our products.