The ZL1 Addons Stealth Rear Diffuser for the 2015–2023 Dodge Charger SRT-body platforms delivers a functional aerodynamic upgrade designed to move airflow cleanly from the differential to the rear of the vehicle. Unlike cosmetic-style alternatives, this diffuser is engineered from 1/4-inch and 3/8-inch HDPE paired with a 14-gauge aluminum mounting pan for rigidity and airflow management.
This system is supplied as a three-piece assembly consisting of the main diffuser and two rear side extensions. The diffuser fins ship disassembled to reduce freight cost and reassemble easily before installation. The kit bolts directly to the factory rear valance, though depending on aftermarket mufflers, minor trimming of the aluminum pan may be required.
A recent hardware update now supports both threaded and unthreaded rear differential cross braces. Verify whether your vehicle uses a threaded or unthreaded rear crossmember. Unthreaded vehicles will require a Rivnut tool to install the supplied hardware.
Built in the USA.
Product Fitment:
Charger 2015-2023 SRT/Hellcat/Scat Pack. Must have the SRT body.
This product will NOT fit the widebody models, standard body SXT models, or 2018 RT/GT's and older vehicles.
Product Fitment Outline:
Charger SRT Body:
15-23 Charger SRT, Hellcat, Daytona, Scat Pack
19-23 Charger R/T or GT
Product Finish:
Standard -This product will have an HDPE main diffuser and fins with a raw aluminum* attachment plate.
Black Powder Coat - This product will have an HDPE main diffuser and fins with a black powder coated aluminum attachment plate.
Shipping:
This product is built to order and will take 7-10 business days to build and prep for shipment. Black powder coated panels have a 14-21 business day build lead time.
*Note:
After market mufflers may interfere with this products side extension install. Make sure your muffler is not hanging below the factory rear fascia/valance.
The aluminum that attaches the diffuser to the car is NOT a fine fished piece, it will have fine marks and scratches obtained during manufacturing. This part of the diffuser is not view-able when the car is sitting on the ground.
Install:
Assembly:
Diffuser Install:
Rear Extension Install:
Remove the outermost Push pin holding the valence to the vehicle.
Grab the correct side diffuser piece and put the ¼-20 bolt through the biggest hole, then through one black aluminum spacer then through the hole which you removed the push pin from and install the locking nut on the top side from the inside of the bumper loosely
Align the front flat section of the diffuser piece closest to the tire flat with the bumper (If you have our rock guards installed, align with the outer edge of the rock guard) then self-tap one of the black screws into the pre drilled hole in the diffuser piece closest to the tire and through the bottom of your bumper temporarily keeping it in place.
Adjust the diffuser piece rear clearances to your preference with the bumper valence and then you can full tighten the ¼-20 bolt you installed earlier keeping the piece from moving.
You can now match drill the rest of the holes through the bumper on the vehicle with a 3/16 drill bit and install the aluminum rivets provided using a rivet gun.
Once all of them are installed remove the small black screw in the earlier step and match drill the hole to a 3/16 and install a rivet in that location as well.
Roll over image to zoom inClick on image to zoom
/
You may also like
Recently viewed
Free Shipping
We offer free shipping on all domestic orders over $199. Shipping cost for international orders are calculated at checkout.
Satisfied or refunded
We know you’ll love our products! But in case you are not fully satisfied for any reason, simply return the item(s) for an exchange, store credit, or refund within 30 days of purchase using our hassle free return portal.
Top-notch support
Our support team are available via email or chat from Mon-Fri 9am-5pm PST except holidays.
1 Year Warranty
We offer a limited 1 year warranty on defects on all our products.