Enhance the aggressive rear styling of your C8 Corvette Z06 with our real carbon fiber rear diffuser fin add-on kit, designed specifically for the OEM widebody rear diffuser found on Z06 and similar C8 trims. This kit adds a sharper, track-inspired look while retaining the factory diffuser and bumper design.
Constructed from genuine 2×2 twill carbon fiber, each fin delivers lightweight strength, precise fitment, and a high-gloss, UV-resistant finish for long-lasting appearance. This is an accent add-on, not a replacement diffuser, engineered to bolt directly onto the factory rear diffuser fins using the included hardware for a clean, OEM-plus result.
Perfect for owners looking to elevate the rear profile without permanent modification, these carbon fiber fins integrate seamlessly with the factory widebody diffuser geometry.
Key Features
Made from real 2×2 twill carbon fiber
Lightweight, durable, and performance-oriented
High-gloss clear coat with UV protection to resist fading and yellowing
Enhances the aggressive look of the OEM widebody rear diffuser
Bolt-on installation using included hardware
OEM-style fit and finish
Add-on accent kit – does not replace the factory diffuser
Vehicle Compatibility
✔ 2023–2027 Chevrolet Corvette C8 Z06 ✔ 2024–2027 Chevrolet Corvette C8 E-Ray ✔ Z06 & E-Ray models equipped with the OEM widebody rear bumper ✔ Compatible with Z07-equipped vehicles
❌ Not compatible with standard Stingray rear bumpers
Specifications
Condition: 100% Brand New
Type: Carbon Fiber Rear Diffuser Fin Add-On
Material: Genuine Carbon Fiber
Weave: 2×2 Twill
Finish: Gloss UV-Protected Clear Coat
Package Includes
4 × Carbon Fiber Rear Diffuser Fins
Mounting Hardware
Installation Notes - Professional install is highly recommended.
Clean the rear diffuser surface thoroughly using isopropyl alcohol.
Test-fit and align each fin for proper positioning.
Secure using the included mounting hardware.
Tighten evenly and confirm alignment before driving.
Upgrade the rear of your C8 Z06 or E-Ray with a subtle yet aggressive carbon fiber accent that looks factory, only better.
Roll over image to zoom inClick on image to zoom
/
Real Carbon Fiber vs. Cheap Imitations
Unlike hydro-dipped plastic parts found on Amazon and eBay, our products are made with genuine carbon fiber. Stronger, lighter, and built to last. Don’t settle for fake. Upgrade with the real deal.
Customer Reviews
Overall rating: 4.8 / 5 from 4972 reviews.
Wanted to share these photos as I didn't have any to go off. A bit challenging to install. I got the smallest right angle drill attachment in could find in order to fasten the upper portion of the fins. Happy with how they turned out but wish I had something that filled in the gap above the fins.
Nice fit and finish. Super easy to install. I didn't have any photos to know how this was going to look but risked it buying these and the diffuser rakes as I though I would prefer the carbon accents over a full carbon bumper.
If have added the before and after photos. The only reason I didn’t give it five stars is in that the cut out for the parking brake indentation had a carbon fiber cover, which you do have on your whole console replacement. Otherwise, as you can see, it looks great. I would like to order your door handle covers, but since you charge shipping, I will not. I will wait till you have a special on shipping. There should not be any charge for shipping on items over $100 in my opinion.
I was impressed with the quality of the Carbon Hood Vent! As with all of Carbonaddon's products I have ordered, they have been as good or better than advertised!
The product quality is great and the carbon fiber looks good. Installation of the engine bay side covers was very easy, taking less than 15 minutes. As I continue to enhance the look of the engine bay on my 2023 Vette, I will definitely look to carbonaddons for more products.
CarbonAddons products are all top quality! I have outfitted my entire ZR1X with them. All pieces look and fit great! They all match perfectly with Chevy's level2 carbon trim.
The center console is easier to install if you remove it because the gauge cluster is to close to the a/c controls. The fit was perfect and looks factory. No gaps anywhere. Love it!
Literally a perfect fit looks like a factory piece it's very thin so it doesn't protrude and look like you stuck it on there it looks like it's from the factory that he's of his fantastic one of the best products I've put on my car
Great fit and finish looks like a factory stock piece adhesive is very easy and secure it's one of the best pieces on the market and looks like a stock item after applied with easy application
Ive always had a positive experience. I’ve ordered multiple orders and I haven’t been disappointed a single time. Always quality parts, packaged well and shipped fast.
Wanted to share these photos as I didn't have any to go off. A bit challenging to install. I got the smallest right angle drill attachment in could find in order to fasten the upper portion of the fins. Happy with how they turned out but wish I had something that filled in the gap above the fins.
They will need some fine tuning to properly fit the contour of the rear bumper and the hardware need to be improved. A drawing with some instructions for installation would be great. They look geart once installed and you do not have to remaove the rear bumper to install them.
We offer free shipping on CarbonAddons® products for continental U.S. orders over $199.
Satisfied or refunded
We know you’ll love our products! But in case you are not fully satisfied for any reason, simply return the item(s) for an exchange, store credit, or refund within 30 days of purchase using our hassle free return portal.
Top-notch support
Our support team are available via email or chat from Mon-Fri 9am-5pm PST except holidays.
1 Year Warranty
We offer a limited 1 year warranty on defects on all our products.